Good Quality Casting Nozzles

Good Quality Casting Nozzles — a one-piece metal spray nozzle combining an inlet shank and a multi-orifice cast base. The cylindrical shank feeds liquid into an internal distribution chamber; three round orifices on the opposite face split the flow into parallel jets, widening the coverage fan and raising the area sprayed per unit of time versus a single-orifice head, while the offset reaction forces can also drive self-rotation. Heavy-wall sand casting or investment casting, finished by shot/sand blasting. No moving parts and no assembly joints, giving high rigidity, strong pressure and vibration resistance, and low clogging risk. Supplied in cast stainless steel (304/316 series) for corrosive media, or cast carbon steel for non-corrosive service. Built for industrial duty — high temperature, high pressure, corrosive media. Typical use: high-pressure and rotary wash-down cleaning, dust suppression and humidification sprays, cooling sprays, chemical and pipeline spraying, fire monitors, and agricultural pesticide or irrigation systems. Nominal size, orifice diameter and spacing, base thickness, pressure rating, and material grade are made to customer drawing or sample.

Send Inquiry

Product Description

Name: Good Quality casting Nozzles

Material: Carbon steel/Aluminum

MOQ: 100 pcs

Package: Inner packing of thickened bubble bag and outer packing of carton, Or sea-worthy pallet transportation

Shipment: DHL, UPS, FedEx, LCL by sea etc.

Tolerance:Precision CNC machining, tolerance ±0.01mm

Inspection:German CMM full inspection, zero defect

OEM & ODM: OEM & ODM accepted, fast sample making

Time:Strict quality control, on-time delivery

Service:Wide material selection for custom parts

Good Quality casting Nozzles

Good quality casting nozzles are one-piece metal spray nozzles combining an inlet shank and a multi-orifice cast base. Liquid enters through the cylindrical shank, spreads inside the distribution chamber, and leaves through three round orifices on the face opposite the shank. Each nozzle is a heavy-wall casting with a shot/sand-blasted matte finish, supplied in cast carbon steel for corrosive media or cast carbon steel for non-corrosive service.

Core selling

1.One-piece cast body, no assembly joints — nothing to loosen, leak, or fail at a seam in a live pressure line.

2.Three parallel jets — wider coverage per pass, so fewer overlapping passes; the offset reaction can also drive self-rotation of the head.

3.Heavy-wall section — resists pressure, vibration, and impact where thin-wall stamped heads deform or crack.

4.No moving parts — fewer failure points in particulate-laden media, less maintenance between inspections.

5.Two material paths, one geometry — stainless for corrosion resistance, carbon steel to hold cost down.

6.Process-controlled surface — uniformity comes from the casting and blasting route, not hand finishing, so incoming inspection stays predictable lot to lot.

Information About Us

Company

manufacturer (more than 20 years' experienced factory)

exporter (export from 2008 year)

Main export markets

• Eastern Europe

• Western Europe

• North America

• Mid East Africa

• Central/South America

• Asia

• Australia